Form-Fill-Seal System CONTINUA

OPTIONS

• Servo-assisted reel-change system.
• Micro-perforation device for the tubular film in order to eliminate air from the inside of the bag
• Printing of alphanumeric characters on one or both sides of the tubular film.
• 45-degree seal for bottom corners and tops of gusseted bags.
• Probe deaerationunit to minimize the volume of fluidized products.
• Probe device to eliminate air between the product and the sealed mouth of the bag.
• Device to add inert gas to the bag before the bag mouth is closed. 
• Device to clean the upper bag edges when working with dusty products.
• Possibility of handling reels with a preformed handle.
• Painting of the structure with a cycle to meet the needs imposed by the products to be handled.
• Construction of the entire machine in stainless steel.
• Base for moving the machine (in manual or motorized), in order to use it with several outlets (silos) and work with products that have different characteristics.
• Device to reopen and clean the upper bag edges for products that could impede sealing.
• Gusseting device to make a gusseted bag from flat tubular film.
• IP 65 protection
• Dust-proofing cushions on the bag-holder.
• Device for sealing a strip over the bag mouth.
• Possibility of making the handle during the bag-forming phase.  

NOTE: The information listed in the chart is strictly indicative and will depend on the specific features of each machine.

OPTIONS

• Servo-assisted reel-change system.
• Micro-perforation device for the tubular film in order to eliminate air from the inside of the bag.
• Printing of alphanumeric characters on one or both sides of the tubular film.
• 45-degree seal for bottom corners and tops of gusseted bags.
• Probe deaerationunit to minimize the volume of fluidized products.
• Probe device to eliminate air between the product and the sealed mouth of the bag.
• Device to add inert gas to the bag before the bag mouth is closed. 
• Device to clean the upper bag edges when working with dusty products.
• Possibility of handling reels with a preformed handle.
• Painting of the structure with a cycle to meet the needs imposed by the products to be handled.
• Construction of the entire machine in stainless steel.
• Base for moving the machine (in manual or motorized), in order to use it with several outlets (silos) and work with products that have different characteristics.
• Device to reopen and clean the upper bag edges for products that could impede sealing.
• Gusseting device to make a gusseted bag from flat tubular film.
• IP 65 protection
• Dust-proofing cushions on the bag-holder.
• Device for sealing a strip over the bag mouth.
• Possibility of making the handle during the bag-forming phase.  

NOTE: The information listed in the chart is strictly indicative and will depend on the specific features of each machine.

OPTIONS

• Servo-assisted reel-change system.
• Micro-perforation device for the tubular film in order to eliminate air from the inside of the bag
• Printing of alphanumeric characters on one or both sides of the tubular film.
• 45-degree seal for bottom corners and tops of gusseted bags.
• Probe deaerationunit to minimize the volume of fluidized products.
• Probe device to eliminate air between the product and the sealed mouth of the bag.
• Device to add inert gas to the bag before the bag mouth is closed. 
• Device to clean the upper bag edges when working with dusty products.
• Possibility of handling reels with a preformed handle.
• Painting of the structure with a cycle to meet the needs imposed by the products to be handled.
• Construction of the entire machine in stainless steel.
• Base for moving the machine (in manual or motorized), in order to use it with several outlets (silos) and work with products that have different characteristics.
• Device to reopen and clean the upper bag edges for products that could impede sealing.
• Gusseting device to make a gusseted bag from flat tubular film.
• IP 65 protection
• Dust-proofing cushions on the bag-holder.
• Device for sealing a strip over the bag mouth.
• Possibility of making the handle during the bag-forming phase.  

NOTE: The information listed in the chart is strictly indicative and will depend on the specific features of each machine.

OPTIONS

• Servo-assisted reel-change system.
• Micro-perforation device for the tubular film in order to eliminate air from the inside of the bag
• Printing of alphanumeric characters on one or both sides of the tubular film.
• 45-degree seal for bottom corners and tops of gusseted bags.
• Probe deaerationunit to minimize the volume of fluidized products.
• Probe device to eliminate air between the product and the sealed mouth of the bag.
• Device to add inert gas to the bag before the bag mouth is closed. 
• Device to clean the upper bag edges when working with dusty products.
• Possibility of handling reels with a preformed handle.
• Painting of the structure with a cycle to meet the needs imposed by the products to be handled.
• Construction of the entire machine in stainless steel.
• Base for moving the machine (in manual or motorized), in order to use it with several outlets (silos) and work with products that have different characteristics.
• Device to reopen and clean the upper bag edges for products that could impede sealing.
• Gusseting device to make a gusseted bag from flat tubular film.
• IP 65 protection
• Dust-proofing cushions on the bag-holder.
• Device for sealing a strip over the bag mouth.
• Possibility of making the handle during the bag-forming phase. 

NOTE: The information listed in the chart is strictly indicative and will depend on the specific features of each machine.