Form-Fill-Seal System CONTINUA

Continua Form Fill Seal

The FFS (Form Fill Seal) "Continua" machine is designed for aerated, fluidized, powdery and/or aggressive products.

The Concetti engineers have studied special technical solutions in terms of both mechanics and electronics, allowing the machine to achieve the high speeds that are required.

The operating phases and the changeover of the machine operating parameters are PLC-assisted and can be completed in a very short amount of time, without any operator intervention, thanks to the actuators mounted on the machine. The monobloc structure, equipped with inspection doors, makes the system perfectly safe for the operator.


Technical Data

Max. productions 600 b/h
Reel Ø max 1500 mm
Bag weight From 10 to 50 kg
Bag length min 320 max 420 mm
min 280 with a special bag-holder
Gusset depth min 40 max 90 mm
Film thickness 80-250 µm
Power supply 380 V- 50 Hz
Installed power 13 kW
Compressed-air consumption 100 Nl/cycle
 Standard degree of protection IP 55
Self-diagnostic system   
Soundproofing  
Contact parts in stainless steel  


OPTIONS

  • Servo-assisted reel-change system.
  • Micro-perforation device for the tubular film in order to eliminate air from the inside of the bag
  • Printing of alphanumeric characters on one or both sides of the tubular film.
  • 45-degree seal for bottom corners and tops of gusseted bags.
  • Probe deaerationunit to minimize the volume of fluidized products.
  • Probe device to eliminate air between the product and the sealed mouth of the bag.
  • Device to add inert gas to the bag before the bag mouth is closed. 
  • Device to clean the upper bag edges when working with dusty products.
  • Possibility of handling reels with a preformed handle.
  • Painting of the structure with a cycle to meet the needs imposed by the products to be handled.
  • Construction of the entire machine in stainless steel.
  • Base for moving the machine (in manual or motorized), in order to use it with several outlets (silos) and work with products that have different characteristics.
  • Device to reopen and clean the upper bag edges for products that could impede sealing.
  • Gusseting device to make a gusseted bag from flat tubular film.
  • IP 65 protection
  • Dust-proofing cushions on the bag-holder.
  • Device for sealing a strip over the bag mouth.
  • Possibility of making the handle during the bag-forming phase.  


NOTE: The information listed in the chart is strictly indicative and will depend on the specific features of each machine.

Max. productions 900 b/h
Reel Ø max 1500 mm
Bag weight From 10 to 40 kg
Bag length min 550 max 1000 mm
Bag width min 320 max 420 mm
min 280 con with a special bag-holder
Gusset depth min 40 max 90 mm
Film thickness 80-250 µm
Power supply 380 V- 50 Hz
Installed power 16 kW
Compressed-air consumption 80 Nl/cycle
 Standard degree of protection IP 55
Self-diagnostic system   
Soundproofing  
Contact parts in stainless steel nbsp;

OPTIONS

  • Servo-assisted reel-change system.
  • Micro-perforation device for the tubular film in order to eliminate air from the inside of the bag
  • Printing of alphanumeric characters on one or both sides of the tubular film.
  • 45-degree seal for bottom corners and tops of gusseted bags.
  • Probe deaerationunit to minimize the volume of fluidized products.
  • Probe device to eliminate air between the product and the sealed mouth of the bag.
  • Device to add inert gas to the bag before the bag mouth is closed. 
  • Device to clean the upper bag edges when working with dusty products.
  • Possibility of handling reels with a preformed handle.
  • Painting of the structure with a cycle to meet the needs imposed by the products to be handled.
  • Construction of the entire machine in stainless steel.
  • Base for moving the machine (in manual or motorized), in order to use it with several outlets (silos) and work with products that have different characteristics.
  • Device to reopen and clean the upper bag edges for products that could impede sealing.
  • Gusseting device to make a gusseted bag from flat tubular film.
  • IP 65 protection
  • Dust-proofing cushions on the bag-holder.
  • Device for sealing a strip over the bag mouth.
  • Possibility of making the handle during the bag-forming phase.  


NOTE: The information listed in the chart is strictly indicative and will depend on the specific features of each machine.

Max. productions 1200 b/h
Reel Ø max 1500 mm
Bag weight From 10 to 40 kg
Bag length min 550 max 1000 mm
Bag width min 320 max 420 mm
min 280 con with a special bag-holder
Gusset depth min 40 max 90 mm
Film thickness 80-250 µm
Power supply 380 V- 50 Hz
Installed power 18 kW
Compressed-air consumption 110 Nl/cycle
 Standard degree of protection IP 55
Self-diagnostic system   
Soundproofing  
Contact parts in stainless steel  

OPTIONS

  • Servo-assisted reel-change system.
  • Micro-perforation device for the tubular film in order to eliminate air from the inside of the bag.
  • Printing of alphanumeric characters on one or both sides of the tubular film.
  • 45-degree seal for bottom corners and tops of gusseted bags.
  • Probe deaerationunit to minimize the volume of fluidized products.
  • Probe device to eliminate air between the product and the sealed mouth of the bag.
  • Device to add inert gas to the bag before the bag mouth is closed. 
  • Device to clean the upper bag edges when working with dusty products.
  • Possibility of handling reels with a preformed handle.
  • Painting of the structure with a cycle to meet the needs imposed by the products to be handled.
  • Construction of the entire machine in stainless steel.
  • Base for moving the machine (in manual or motorized), in order to use it with several outlets (silos) and work with products that have different characteristics.
  • Device to reopen and clean the upper bag edges for products that could impede sealing.
  • Gusseting device to make a gusseted bag from flat tubular film.
  • IP 65 protection
  • Dust-proofing cushions on the bag-holder.
  • Device for sealing a strip over the bag mouth.
  • Possibility of making the handle during the bag-forming phase.  


NOTE: The information listed in the chart is strictly indicative and will depend on the specific features of each machine.

Max. productions 1600 b/h
Reel Ø max 1500 mm
Bag weight From 10 to 40 kg
Bag length min 550 max 1000 mm
Bag width min 320 max 420 mm
min 280 con with a special bag-holder
Gusset depth min 40 max 90 mm
Film thickness 80-250 µm
Power supply 380 V- 50 Hz
Installed power 18 kW
Compressed-air consumption 110 Nl/cycle
 Standard degree of protection IP 55
Self-diagnostic system   
Soundproofing  
Contact parts in stainless steel  

OPTIONS

  • Servo-assisted reel-change system.
  • Micro-perforation device for the tubular film in order to eliminate air from the inside of the bag
  • Printing of alphanumeric characters on one or both sides of the tubular film.
  • 45-degree seal for bottom corners and tops of gusseted bags.
  • Probe deaerationunit to minimize the volume of fluidized products.
  • Probe device to eliminate air between the product and the sealed mouth of the bag.
  • Device to add inert gas to the bag before the bag mouth is closed. 
  • Device to clean the upper bag edges when working with dusty products.
  • Possibility of handling reels with a preformed handle.
  • Painting of the structure with a cycle to meet the needs imposed by the products to be handled.
  • Construction of the entire machine in stainless steel.
  • Base for moving the machine (in manual or motorized), in order to use it with several outlets (silos) and work with products that have different characteristics.
  • Device to reopen and clean the upper bag edges for products that could impede sealing.
  • Gusseting device to make a gusseted bag from flat tubular film.
  • IP 65 protection
  • Dust-proofing cushions on the bag-holder.
  • Device for sealing a strip over the bag mouth.
  • Possibility of making the handle during the bag-forming phase.  


NOTE: The information listed in the chart is strictly indicative and will depend on the specific features of each machine.

Max. productions 1800 b/h
Reel Ø max 1500 mm
Bag weight From 4 to 40 kg
Bag length min 550 max 1000 mm
Bag width min 320 max 420 mm
min 280 con with a special bag-holder
Gusset depth min 40 max 90 mm
Film thickness 80-250 µm
Power supply 380 V- 50 Hz
Installed power 18 kW
Compressed-air consumption 110 Nl/cycle
Standard degree of protection IP 55
Self-diagnostic system  
Soundproofing  
Contact parts in stainless steel  

OPTIONS

  • Servo-assisted reel-change system.
  • Micro-perforation device for the tubular film in order to eliminate air from the inside of the bag
  • Printing of alphanumeric characters on one or both sides of the tubular film.
  • 45-degree seal for bottom corners and tops of gusseted bags.
  • Probe deaerationunit to minimize the volume of fluidized products.
  • Probe device to eliminate air between the product and the sealed mouth of the bag.
  • Device to add inert gas to the bag before the bag mouth is closed. 
  • Device to clean the upper bag edges when working with dusty products.
  • Possibility of handling reels with a preformed handle.
  • Painting of the structure with a cycle to meet the needs imposed by the products to be handled.
  • Construction of the entire machine in stainless steel.
  • Base for moving the machine (in manual or motorized), in order to use it with several outlets (silos) and work with products that have different characteristics.
  • Device to reopen and clean the upper bag edges for products that could impede sealing.
  • Gusseting device to make a gusseted bag from flat tubular film.
  • IP 65 protection
  • Dust-proofing cushions on the bag-holder.
  • Device for sealing a strip over the bag mouth.
  • Possibility of making the handle during the bag-forming phase. 


NOTE: The information listed in the chart is strictly indicative and will depend on the specific features of each machine.

GET A QUOTE

Have a project you need help with? We have years of experience to help solve every kind of bag filling issue. Enter your details below to have our Sales Team create a personalized quote for your individual needs.

Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
* indicate the field is required

INDUSTRY BROCHURE

We have the solution that fits your requirements! Download the brochure with the specific bagging and palletising solutions to this industry.

Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
* indicate the field is required

GENERAL CATALOGUE

To enhance your manufacturing facility efficiency we have a comprehensive range of automated packaging solutions to suit any application. Download this catalogue to find out more.

Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input

NEWSLETTER

Sign up to get updates!

 

CONCETTI S.P.A.

Via della Comunità, 14
Frazione Ospedalicchio
06083 Bastia Umbra / PG / ITALY

P.I. 00402270540

T. +39 075 801561
F. +39 075 8000894
This email address is being protected from spambots. You need JavaScript enabled to view it.

CONCETTI NORTH AMERICA CORP.

5450 Technology Parkway
Suite 200
Braselton, GA 30517 / USA

Toll free # 844-601-5475
Direct # 706-654-3000

This email address is being protected from spambots. You need JavaScript enabled to view it.

CONCETTI DO BRASIL LTDA

RUA AVELINO SILVEIRA FRANCO, N° 149, SALA 420
Ville Sainte Helene
Campinas/SP, Brasil
CEP 13.105-822

T. +55 (19) 9 9838.2352
This email address is being protected from spambots. You need JavaScript enabled to view it.